How to Deal With the Excess Rachet Straps?

How to deal with the excess rachet straps? Today, we invite the expert workers from rachet straps manufacturer to show us the skill about how to quickly tidy the leftover rachet tie down straps?

The rachet tie down strap plays the role of binding and fixing the goods during transportation. We can choose different webbing lengths according to needs, which mainly depends on the size of the goods and the height of stacking in the vehicle or container. For example, a 4-meter-long binding belt will definitely have extra parts during actual use. If it is too long, it can be stored in the vehicle to prevent it from falling outside.

Ideally, the excess webbing straps will not be too long, because it is selected according to needs. However, if a longer rachet tie down strap is used to bundle smaller goods, there will be a mismatch, which will lead to excess webbing. Because the part is longer, we can roll it up and put it somewhere out of the way to avoid accidents caused by the wheels being winched during transportation. What we also need to pay attention to is that we should avoid twisting and knotting during the entire use of the binding webbing, otherwise it will get stuck when it passes the position of the ratchet shaft of the machine head, which will affect the tightening effect.

It is not difficult to store the excess parts of a rachet tie down strap. The purpose is also to protect the ratchet tensioner belt from further damage. If there is obvious wear or scratches during use, it should be replaced. If there is no problem with the machine head, you can just Replace the strap, but it should be noted that the short strap connecting the machine head is sewn and connected by a bolt. When replacing the webbing, you only need to unscrew the screw.