Specification of Eye & Eye Flat Webbing Slings

It is wise to wholesale eye and eye flat lifting slings through flat webbing slings manufactuer to purchase at the best cost efficient price. Here let’s show you the the specification of eye & eye flat webbing slings, eye-to-eye flat webbing slings, flat eye & eye nylon lifting sling, nylon slings flat eye and eye and polyester webbing sling with eye/eye for you,

The eye of the flat lifting sling is also called "lifting ear" and "buckle at both ends". Its specifications vary in width, thickness, sewing method and processing. In the eyes of users who are not familiar with Chenli's products, some parameters are considered to be unsafe. For example, why are the eyelets narrower than the belt body? To illustrate this:

Ring eye width

1. The width of the eye of the flat lifting belt buckled at both ends is mostly narrower than the belt body. The width of the eye changes accordingly depending on the width of the belt. However, the eye of the 1-ton or 2-ton flat lifting belt is mostly the same width as the belt body, basically 25mm, 30mm, 50mm, and 60mm. The reason is that there is no folding and sewing and the same width is retained. Otherwise, the belt itself is not wide enough and the eyelet does not need to be reduced.

2. The narrow eyelet does not mean that the material is reduced. According to the six different eyelet sewing methods, it is the extended part of the belt body that is folded and sewn in different ways, so it looks narrow. As a hanging point, the soft eye reinforcement method is to add a layer of wear-resistant protective cover to reduce wear caused by friction.

Eye angle and length

The opening angle of the lifting lugs on the hook or shackle is not allowed to exceed 20°. The eye length of the flat lifting belt is stipulated to be 35cm long if the eye is within 4 tons (width ≤ 100mm); the eye of the 4 to 5 ton lifting belt is The eye is 40cm long; the lifting eye width for slings above 8 tons is 50cm; for slings above 15 tons, the width is 100cm.