Flat Lifting Sling Maunfacturer

Xian Dumei Machinery is a certified flat lifting sling maunfacturer and flat webbing sling factory and is authorized by TUV. So all our flat lifting slings, flat webbig slings and wholesale lifting belt slings can reach the European Standard. Buy flat lifting slings from Xian Dumei Machinery, you get the worry-free top quality lifting slings.

It is more appropriate to choose a flat webbing sling if the lifting target needs to be connected and fixed at the bottom and within the rated load. Affected by the appearance, the flat lifting belt can be better attached to the surface of the lifting target, and the friction is increased by increasing the contact surface to reduce the pressure, thereby ensuring stability and preventing the lifting belt from displacement.

Flat Lifting Sling has the advantages of lightness, softness, high safety factor, long service life, non-conductivity, and corrosion resistance, and has been widely used in the lifting industry. Let Xian Dumei Flat Lifting Sling Maunfacturer introduce you how to use the flat lifting slings in a correct way.

1. During the lifting process, never use a damaged flat lifting belt.

2. During the lifting process, do not twist or twist the flat lifting belt to prevent the flat lifting belt from tying and affecting its use.

3. Avoid tearing the sewing joints of the flat lifting belt or overloading it.

4. When moving the flat lifting belt, do not drag or pull it.

5. If the flat lifting sling is used in a place where it may be contaminated by chemicals or at high temperatures, you should seek help from the supplier.

In summary, since the flat lifting sling is made of high-quality synthetic fibers, it is sewn by advanced weaving technology and equipment through different stitching methods. Therefore, when using it, you should pay attention to the above points to avoid reducing the service life of the flat lifting sling, which will not be worth the loss. If you still don’t understand the precautions for using flat lifting slings, you can consult the engineers of Xian Dumei Flat Lifting Sling Maunfacturer.

Because flat lifting sling can bring convenience and speed to our work. Let’s talk about the detailed requirements of the braiding material and width and thickness of the flat lifting sling. The braiding material of the flat lifting sling should be made entirely of industrial yarn, the material is easy to pull, has good thermal stability, and its breaking strength is not less than 60cN/tex. The main materials are: polyamide (PA), high-tenacity multi-fiber yarn, polyester (PES), high-tenacity multi-fiber yarn, polypropylene (PP), high-tenacity multi-fiber yarn. Whether it is traditional weaving or shuttleless weaving, the webbing should be stacked and woven uniformly to ensure that if one wire breaks during weaving, its end cannot be pulled out of the webbing, thereby avoiding the webbing from unraveling due to the broken wire. The weaving method should ensure that when the webbing flat sling is tested, when the webbing width is not more than 100mm, the completed width change is reduced by no more than 10%; when the webbing width is greater than 100mm, the completed width change is reduced by no more than 12%. Choose Xian Dumei Flat Lifting Sling Maunfacturer to purchase your flat webbing slings, you choose an expert flat webbing sling factory. Contact now to get a free quote.